PostgreSQL的数字函数主要用于数字操纵和/或数学计算。下表详列的数字函数:
ABS(X)
The ABS() function returns the absolute value of X. Consider the following example:
- testdb=# SELECT ABS(2);
- +---------------------------------------------------------+
- | ABS(2) |
- +---------------------------------------------------------+
- | 2 |
- +---------------------------------------------------------+
- 1 row in set (0.00 sec)
- testdb=# SELECT ABS(-2);
- +---------------------------------------------------------+
- | ABS(2) |
- +---------------------------------------------------------+
- | 2 |
- +---------------------------------------------------------+
- 1 row in set (0.00 sec)
ACOS(X)
This function returns the arccosine of X. The value of X must range between .1 and 1 or NULL will be returned. Consider the following example:
- testdb=# SELECT ACOS(1);
- +---------------------------------------------------------+
- | ACOS(1) |
- +---------------------------------------------------------+
- | 0.000000 |
- +---------------------------------------------------------+
- 1 row in set (0.00 sec)
ASIN(X)
The ASIN() function returns the arcsine of X. The value of X must be in the range of .1 to 1 or NULL is returned.
- testdb=# SELECT ASIN(1);
- +---------------------------------------------------------+
- | ASIN(1) |
- +---------------------------------------------------------+
- | 1.5707963267949 |
- +---------------------------------------------------------+
- 1 row in set (0.00 sec)
ATAN(X)
This function returns the arctangent of X.
- testdb=# SELECT ATAN(1);
- +---------------------------------------------------------+
- | ATAN(1) |
- +---------------------------------------------------------+
- | 0.78539816339745 |
- +---------------------------------------------------------+
- 1 row in set (0.00 sec)
#p#
ATAN2(Y,X)
This function returns the arctangent of the two arguments: X and Y. It is similar to the arctangent of Y/X, except that the signs of both are used to find the quadrant of the result.
- testdb=# SELECT ATAN2(3,6);
- +---------------------------------------------------------+
- | ATAN2(3,6) |
- +---------------------------------------------------------+
- | 0.46364760900081 |
- +---------------------------------------------------------+
- 1 row in set (0.00 sec)
CEIL(X)
CEILING(X)
These function return the smallest integer value that is not smaller than X. Consider the following example:
- testdb=# SELECT CEILING(3.46);
- +---------------------------------------------------------+
- | CEILING(3.46) |
- +---------------------------------------------------------+
- | 4 |
- +---------------------------------------------------------+
- 1 row in set (0.00 sec)
- testdb=# SELECT CEIL(-6.43);
- +---------------------------------------------------------+
- | CEIL(-6.43) |
- +---------------------------------------------------------+
- | -6 |
- +---------------------------------------------------------+
- 1 row in set (0.00 sec)
COS(X)
This function returns the cosine of X. The value of X is given in radians。
- testdb=#SELECT COS(90);
- +---------------------------------------------------------+
- | COS(90) |
- +---------------------------------------------------------+
- | -0.44807361612917 |
- +---------------------------------------------------------+
- 1 row in set (0.00 sec)
COT(X)
This function returns the cotangent of X. Consider the following example:
- testdb=#SELECT COT(1);
- +---------------------------------------------------------+
- | COT(1) |
- +---------------------------------------------------------+
- | 0.64209261593433 |
- +---------------------------------------------------------+
- 1 row in set (0.00 sec)
DEGREES(X)
This function returns the value of X converted from radians to degrees。
- testdb=#SELECT DEGREES(PI());
- +---------------------------------------------------------+
- | DEGREES(PI()) |
- +---------------------------------------------------------+
- | 180.000000 |
- +---------------------------------------------------------+
- 1 row in set (0.00 sec)
EXP(X)
This function returns the value of e (the base of the natural logarithm) raised to the power of X。
- testdb=#SELECT EXP(3);
- +---------------------------------------------------------+
- | EXP(3) |
- +---------------------------------------------------------+
- | 20.085537 |
- +---------------------------------------------------------+
- 1 row in set (0.00 sec)
FLOOR(X)
This function returns the largest integer value that is not greater than X。
- testdb=#SELECT FLOOR(7.55);
- +---------------------------------------------------------+
- | FLOOR(7.55) |
- +---------------------------------------------------------+
- | 7 |
- +---------------------------------------------------------+
- 1 row in set (0.00 sec)
GREATEST(n1,n2,n3,..........)
The GREATEST() function returns the greatest value in the set of input parameters (n1, n2, n3, and so on). The following example uses the GREATEST() function to return the largest number from a set of numeric values:
- testdb=#SELECT GREATEST(3,5,1,8,33,99,34,55,67,43);
- +---------------------------------------------------------+
- | GREATEST(3,5,1,8,33,99,34,55,67,43) |
- +---------------------------------------------------------+
- | 99 |
- +---------------------------------------------------------+
- 1 row in set (0.00 sec)
LEAST(N1,N2,N3,N4,......)
The LEAST() function is the opposite of the GREATEST() function. Its purpose is to return the least-valued item from the value list (N1, N2, N3, and so on). The following example shows the proper usage and output for the LEAST() function:
- testdb=#SELECT LEAST(3,5,1,8,33,99,34,55,67,43);
- +---------------------------------------------------------+
- | LEAST(3,5,1,8,33,99,34,55,67,43) |
- +---------------------------------------------------------+
- | 1 |
- +---------------------------------------------------------+
- 1 row in set (0.00 sec)
LOG(X)
LOG(B,X)
The single argument version of the function will return the natural logarithm of X. If it is called with two arguments, it returns the logarithm of X for an arbitrary base B. Consider the following example:
- testdb=#SELECT LOG(45);
- +---------------------------------------------------------+
- | LOG(45) |
- +---------------------------------------------------------+
- | 1.65321251377534 |
- +---------------------------------------------------------+
- 1 row in set (0.00 sec)
- testdb=#SELECT LOG(2,65536);
- +---------------------------------------------------------+
- | LOG(2,65536) |
- +---------------------------------------------------------+
- | 16.000000 |
- +---------------------------------------------------------+
- 1 row in set (0.00 sec)
MOD(N,M)
This function returns the remainder of N divided by M. Consider the following example:
- testdb=#SELECT MOD(29,3);
- +---------------------------------------------------------+
- | MOD(29,3) |
- +---------------------------------------------------------+
- | 2 |
- +---------------------------------------------------------+
- 1 row in set (0.00 sec)
PI()
This function simply returns the value of pi. SQL internally stores the full double-precision value of pi。
- testdb=#SELECT PI();
- +---------------------------------------------------------+
- | PI() |
- +---------------------------------------------------------+
- | 3.141593 |
- +---------------------------------------------------------+
- 1 row in set (0.00 sec)
POW(X,Y)
POWER(X,Y)
These two functions return the value of X raised to the power of Y。
- testdb=# SELECT POWER(3,3);
- +---------------------------------------------------------+
- | POWER(3,3) |
- +---------------------------------------------------------+
- | 27 |
- +---------------------------------------------------------+
- 1 row in set (0.00 sec)
RADIANS(X)
This function returns the value of X, converted from degrees to radians。
- testdb=#SELECT RADIANS(90);
- +---------------------------------------------------------+
- | RADIANS(90) |
- +---------------------------------------------------------+
- |1.570796 |
- +---------------------------------------------------------+
- 1 row in set (0.00 sec)
ROUND(X)
ROUND(X,D)
This function returns X rounded to the nearest integer. If a second argument, D, is supplied, then the function returns X rounded to D decimal places. D must be positive or all digits to the right of the decimal point will be removed. Consider the following example:
- testdb=#SELECT ROUND(5.693893);
- +---------------------------------------------------------+
- | ROUND(5.693893) |
- +---------------------------------------------------------+
- | 6 |
- +---------------------------------------------------------+
- 1 row in set (0.00 sec)
- testdb=#SELECT ROUND(5.693893,2);
- +---------------------------------------------------------+
- | ROUND(5.693893,2) |
- +---------------------------------------------------------+
- | 5.69 |
- +---------------------------------------------------------+
- 1 row in set (0.00 sec)
SIGN(X)
This function returns the sign of X (negative, zero, or positive) as .1, 0, or 1。
- testdb=#SELECT SIGN(-4.65);
- +---------------------------------------------------------+
- | SIGN(-4.65) |
- +---------------------------------------------------------+
- | -1 |
- +---------------------------------------------------------+
- 1 row in set (0.00 sec)
- testdb=#SELECT SIGN(0);
- +---------------------------------------------------------+
- | SIGN(0) |
- +---------------------------------------------------------+
- | 0 |
- +---------------------------------------------------------+
- 1 row in set (0.00 sec)
- testdb=#SELECT SIGN(4.65);
- +---------------------------------------------------------+
- | SIGN(4.65) |
- +---------------------------------------------------------+
- | 1 |
- +---------------------------------------------------------+
- 1 row in set (0.00 sec)
SIN(X)
This function returns the sine of X. Consider the following example:
- testdb=#SELECT SIN(90);
- +---------------------------------------------------------+
- | SIN(90) |
- +---------------------------------------------------------+
- | 0.893997 |
- +---------------------------------------------------------+
- 1 row in set (0.00 sec)
SQRT(X)
This function returns the non-negative square root of X. Consider the following example:
- testdb=#SELECT SQRT(49);
- +---------------------------------------------------------+
- | SQRT(49) |
- +---------------------------------------------------------+
- | 7 |
- +---------------------------------------------------------+
- 1 row in set (0.00 sec)
TAN(X)
This function returns the tangent of the argument X, which is expressed in radians。
- testdb=#SELECT TAN(45);
- +---------------------------------------------------------+
- | TAN(45) |
- +---------------------------------------------------------+
- | 1.619775 |
- +---------------------------------------------------------+
- 1 row in set (0.00 sec)
原文链接:http://www.yiibai.com/html/postgresql/2013/080892.html