讲述华为交换机堆叠命令实例,熟练掌握下面涉及到的华为交换机堆叠知识,你就会更轻松的选择自己喜欢的方式来做好华为交换机堆叠的工作。很多方法都会使你豁然开朗的。
# 在交换机Switch A 上配置堆叠IP 地址池
[Quidway] stacking ip-pool 129.10.1.1 5
# 在交换机Switch A 上建立华为交换机堆叠
[Quidway] stacking enable
# 在主交换机Switch A 上显示华为交换机堆叠信息
<stack_0. Quidway> display stacking
Main device for stack.
Total members:3
# 在主交换机Switch A 上显示华为交换机堆叠成员信息
<stack_0. Quidway> display stacking members
Member number: 0
Name:stack_0.Quidway
Device:Quidway S3526
MAC Address:00e0.fc07.0bc0
Member status:Cmdr
Member number: 1
Name:stack_1.Quidway
Device:Quidway S3026
MAC Address:00e0.fc07.58a0
Member status:Up
Member number: 2
Name:stack_2.Quidway
Device:Quidway S3026
MAC Address:00e0.fc07.58a1
Member status:Up
# 切换到从交换机Switch B 上进行配置
<stack_0. Quidway> stacking 1
<stack_1. Quidway>
# 在从交换机Switch B 上显示华为交换机堆叠信息
<stack_1. Quidway> display stacking
Slave device for stack.
Member number: 1
Main switch mac address:00e0.fc07.0bc0
# 切换回主交换机Switch A 上进行配置
<stack_1. Quidway> quit
# 切换到从交换机Switch C 上进行配置
<stack_0. Quidway> stacking 2
<stack_2. Quidway>
# 切换回主交换机Switch A 上进行配置
<stack_2. Quidway> quit
<stack_0. Quidway>