新的第三版思科认证CCIE安全实验的大纲已经发布,并于2009年4月开始实行,硬件上没有太多的改变,具体思科认证CCIE安全实验考试硬件,软件版本和考纲如下,斜体部分是新内容。
第三版思科认证CCIE安全实验大纲硬件部分:
Hardware
A. Cisco 3800 Series Integrated Services Routers (ISR)
B. Cisco 1800 Series Integrated Services Routers (ISR)
C. Cisco Catalyst 3560 Series Switches
D. Cisco ASA 5500 Series Adaptive Security Appliances
E. Cisco IPS Series 4200 Intrusion Prevention System sensors
F. Cisco Secure Access Control Server for Windows
第三版思科认证CCIE安全实验大纲软件部分:
Software
A. Cisco ISR Series running IOS Software Version 12.4T Advanced Enterprise Services feature set is used on all routers
B. Cisco Catalyst 3560 Series Switches running Cisco IOS Software Release 12.2(44)SE or above
C. Cisco ASA 5500 Series Adaptive Security Appliances OS Software Version 8.x
D. Cisco IPS Software Release 6.1.x
E. Cisco VPN Client Software for Windows, Release 5.x
F. Cisco Secure ACS for Windows Version 4.1
V3 Blueprint
I.Implement secure networks using Cisco ASA Firewalls
A. Perform basic firewall Initialization
B. Configure device management
C. Configure address translation (nat, global, static)
D. Configure ACLs
E. Configure IP routing
F. Configure object groups
G. Configure VLANs
H. Configure filtering
I. Configure failover
J. Configure Layer 2 Transparent Firewall
K. Configure security contexts (virtual firewall)
L. Configure Modular Policy Framework
M. Configure Application-Aware Inspection
N. Configure high availability solutions
O. Configure QoS policies
II.Implement secure networks using Cisco IOS Firewalls
A. Configure CBAC
B. Configure Zone-Based Firewall
C. Configure Audit
D. Configure Auth Proxy
E. Configure PAM
F. Configure access control
G. Configure performance tuning
H. Configure advanced IOS Firewall features
III.Implement secure networks using Cisco VPN solutions
A. Configure IPsec LAN-to-LAN (IOS/ASA)
B. Configure SSL VPN (IOS/ASA)
C. Configure Dynamic Multipoint VPN (DMVPN)
D. Configure Group Encrypted Transport (GET) VPN
E. Configure Easy VPN (IOS/ASA)
F. Configure CA (PKI)
G. Configure Remote Access VPN
H. Configure Cisco Unity Client
I. Configure Clientless WebVPN
J. Configure AnyConnect VPN
K. Configure XAuth, Split-Tunnel, RRI, NAT-T
L. Configure High Availability
M. Configure QoS for VPN
N. Configure GRE, mGRE
O. Configure L2TP
P. Configure advanced Cisco VPN features
IV.Configure Cisco IPS to mitigate network threats
A. Configure IPS 4200 Series Sensor Appliance
B. Initialize the Sensor Appliance
C. Configure Sensor Appliance management
D. Configure virtual Sensors on the Sensor Appliance
E. Configure security policies
F. Configure promiscuous and inline monitoring on the Sensor Appliance
G. Configure and tune signatures on the Sensor Appliance
H. Configure custom signatures on the Sensor Appliance
I. Configure blocking on the Sensor Appliance
J. Configure TCP resets on the Sensor Appliance
K. Configure rate limiting on the Sensor Appliance
L. Configure signature engines on the Sensor Appliance
M. Use IDM to configure the Sensor Appliance
N. Configure event action on the Sensor Appliance
O. Configure event monitoring on the Sensor Appliance
P. Configure advanced features on the Sensor Appliance
Q. Configure and tune Cisco IOS IPS
R. Configure SPAN & RSPAN on Cisco switches
S. jfdk
V.Implement Identity Management
A. Configure RADIUS and TACACS+ security protocols
B. Configure LDAP
C. Configure Cisco Secure ACS
D. Configure certificate-based authentication
E. Configure proxy authentication
F. Configure 802.1x
G. Configure advanced identity management features
H. Configure Cisco NAC Framework
VI.Implement Control Plane and Management Plane Security
A. Implement routing plane security features (protocol authentication, route filtering)
B. Configure Control Plane Policing
C. Configure CP protection and management protection
D. Configure broadcast control and switchport security
E. Configure additional CPU protection mechanisms (options drop, logging interval)
F. Disable unnecessary services
G. Control device access (Telnet, HTTP, SSH, Privilege levels)
H. Configure SNMP, Syslog, AAA, NTP
I. Configure service authentication (FTP, Telnet, HTTP, other)
J. Configure RADIUS and TACACS+ security protocols
K. Configure device management and security
VII.Configure Advanced Security
A. Configure mitigation techniques to respond to network attacks
B. Configure packet marking techniques
C. Implement security RFCs (RFC1918/3330, RFC2827/3704)
D. Configure Black Hole and Sink Hole solutions
E. Configure RTBH filtering (Remote Triggered Black Hole)
F. Configure Traffic Filtering using Access-Lists
G. Configure IOS NAT
H. Configure TCP Intercept
I. Configure uRPF
J. Configure CAR
K. Configure NBAR
L. Configure NetFlow
M. Configure Anti-Spoofing solutions
N. Configure Policing
O. Capture and utilize packet captures
P. Configure Transit Traffic Control and Congestion Management
Q. Configure Cisco Catalyst advanced security features
VIII.Identify and Mitigate Network Attacks
A. Identify and protect against fragmentation attacks
B. Identify and protect against malicious IP option usage
C. Identify and protect against network reconnaissance attacks
D. Identify and protect against IP spoofing attacks
E. Identify and protect against MAC spoofing attacks
F. Identify and protect against ARP spoofing attacks
G. Identify and protect against Denial of Service (DoS) attacks
H. Identify and protect against Distributed Denial of Service (DDoS) attacks
I. Identify and protect against Man-in-the-Middle (MiM) attacks
J. Identify and protect against port redirection attacks
K. Identify and protect against DHCP attacks
L. Identify and protect against DNS attacks
M. Identify and protect against Smurf attacks
N. Identify and protect against SYN attacks
O. Identify and protect against MAC Flooding attacks
P. Identify and protect against VLAN hoping attacks
Q. Identify and protect against various Layer2 and Layer3 attacks
以上为第三版思科认证CCIE安全实验考试大纲变动情况。
【编辑推荐】